Custom Gangsheet

🛑🛑 Important Notes: Measurements and Artwork Guidelines 🛑🛑

• ❗❗ Please note that the measurements provided in this section refer to width only. If you need length measurements, kindly specify them in the personalization section.
• ❗❗ Designs will be adjusted based on the ordered width measurement, and length measurements will vary proportionally.

🟢 Fabric Compatibility and Artwork Requirements 🟢

• 🟢 This transfer can be applied to all fabric blends and colors.
• 📢 Please ensure your artwork is print-ready and at the desired size, preferably at 300 DPI resolution. The background must be 100% transparent, or it will be printed as received.

🔥 DTF Transfer Application Instructions 🔥

1. Preheat the garment for 15 seconds to remove excess moisture. Let it cool before applying the transfer.
2. Place the transfer on the shirt, white side down, with the image facing up.
3. Press at 325F for 15 seconds under firm pressure.
4. Remove the garment from the press and allow it to cool until warm enough to peel.
5. Cold peel
6. Cover the image with parchment paper and press again for 15 seconds using a Teflon sheet, butcher paper, or tissue paper.

• ❗❗ Note: If the image doesn't come off completely, repress with the image in place, let it cool, and repeel the film.

🧼 Care Instructions 🧼

• Wash inside out in cold or warm water with a delicate cycle and hang to dry.
• Do not bleach or tumble dry. Avoid direct ironing on the design. Inside-out ironing prolongs the design's lifespan.